img

QQ群聊

img

官方微信

  • CN 62-1112/TF 
  • ISSN 1005-2518 
  • 创刊于1988年
高级检索
采选技术与矿山管理

六棱柱磨矿介质在黑钨矿选矿试验中的应用

  • 赵汝全 ,
  • 李献帅 ,
  • 李琳 ,
  • 吴彩斌 ,
  • 石贵明
展开
  • 江西理工大学江西省矿业工程重点实验室,江西  赣州   341000
赵汝全(1989-),男,江苏泗洪人,硕士研究生,从事碎磨理论与过程控制研究工作。 1196944949@qq.com

收稿日期: 2016-06-28

  修回日期: 2016-09-18

  网络出版日期: 2017-01-22

基金资助

江西省教育厅课题“矽卡岩钨矿泥化行为规律及选择性磨矿调控机理研究”(编号:GJJ150651)和江西理工大学校级重点课题“SAB工艺中半自磨机和球磨机的功率计算方法研究”(编号:NSFJ2015-K02)联合资助

Application of Hexagonal Prism as Grinding Medium in Mineral Processing Experiment of Wolframite

  • ZHAO Ruquan ,
  • LI Xianshuai ,
  • LI Lin ,
  • WU Caibin ,
  • SHI Guiming
Expand
  • Jiangxi Key Laboratory of Mining Engineering,Jiangxi University of Science and Technology,Ganzhou   341000,Jiangxi,China

Received date: 2016-06-28

  Revised date: 2016-09-18

  Online published: 2017-01-22

摘要

广东某铅锌矿中有价元素主要为W、Pb和Zn,其质量分数依次为1.32%、1.77%和1.87%,伴生银。钨矿物主要以黑钨矿形式存在,少量为白钨矿和钨华。其中,黑钨矿性脆,在破碎磨矿过程中易产生过粉碎现象,而现有的选矿技术难以回收细颗粒钨矿,导致其损失率增加。不同磨矿介质对矿物解离和磨矿效果具有重要影响,通过对不同磨矿介质和磨矿产品进行粒度分析,并分别开展分选试验,发现六棱柱磨矿介质对细颗粒矿物具有较好的选择性,有助于减少难选粒级的产生。广东某含钨铅锌矿采用六棱柱磨矿—摇床粗选—溢流产品悬振分选获得粗精矿含钨15.41%、铅16.21%、锌17.03%、银167.92×10-6,钨、铅、锌、银的回收率分别为81.31%、63.97%、63.63%和46.46%,摇床尾矿中钨、铅、锌、银的损失率分别为8.08%、12.89%、17.16%和22.80%,达到了资源综合利用的目的。通过引入新型的六棱柱磨矿介质,使得广东某铅锌矿的选矿技术指标得到很大提升,取得了显著成效。

本文引用格式

赵汝全 , 李献帅 , 李琳 , 吴彩斌 , 石贵明 . 六棱柱磨矿介质在黑钨矿选矿试验中的应用[J]. 黄金科学技术, 2016 , 24(6) : 107 -111 . DOI: 10.11872/j.issn.1005-2518.2016.06.107

Abstract

The major valuable elements of a certain lead-zinc mine in Guangdong Province are tungsten,lead and zinc,containing 1.32% of tungsten,1.77% of lead,1.87% of zinc,and accompanying with silver.Tungsten mineral content exists mainly in the form of wolframite,and a small amount in the form of scheelite and tungstite.Among them,the wolframite is brittle,which would cause a over crushing phenomenon in crushing and grinding process.However,the existing beneficiation technology is difficult to recover fine practical tungsten,so lead to the loss rate of tungsten increased.Different grinding media have a significant influence on mineral dissociation and grinding efficiency.Particle size analysises to grinding products of different grinding media were done in this paper,and separation experiments were carried out respectively,which indicated that hexagonal prism as grinding medium had good selective effect on fine mineral particles and thus reduced the production of refractory size fraction.With hexagonal prism as grinding medium,technological process of grinding with hexagonal prisms-table separation-suspension vibration sorting to over flow products was employed to tungstenic lead-zinc mine in Guangdong and rough concentrate was obtained containing 15.41% of tungsten,16.21% of lead,17.03% of zinc and 167.92 of silver.Meanwhile,recovery rates of tungsten,lead,zinc and silver were 81.31%,63.97%,63.63% and 46.46%,respectively,and loss rates of tungsten,lead,zinc and silver in shaking table tailings were 8.08%,12.89%,17.16% and 22.80%,respectively,achieving the goal of comprehensive utilization of resources.By introducing a new type of grinding medium hexagonal prism,the index of a certain lead-zinc mine in Guangdong dramatically improved,has made remarkable achievements.

参考文献

[1]  张涛,吴艳,张德会,等.浅析我国钨矿开发利用过程中存在的问题与对策[J].资源与产业,2009(5):79-81.
[2] 安占涛,罗小娟.钨选矿工艺及其进展[J].矿业工程,2005(5):29-32.
[3] 罗仙平,路永森,张建超,等.黑钨矿选矿工艺进展[J].金属矿山,2011(12):87-90.
[4] 胡文英,余新阳.微细粒黑钨矿浮选研究现状[J].有色金属科学与工程,2013(5):102-107.
[5] 熊瓒恩.耐磨柱状介质在再磨机中的应用[J].中国矿业,1994(3):45-48.
[6] 石贵明,周意超,吴彩斌,等.双球面六棱柱磨矿介质:CN104888904A[P].2015-09-09.
[7] 郭永杰,陈赐云,杜令攀,等.一种异形磨矿介质:CN105327749A[P].2016-02-17.
[8] 周惠文,刘雁翎,高鹏,等.异形磨矿介质及磨矿方法:CN104525322A[P].2015-04-22.
[9] 雷小莉,李金泉,徐忠敏,等.精确化装补球技术在金翅岭金矿选矿的应用[J].黄金科学技术,2015,23(6):87-91.
[10] 李若兰,庞建涛,王灿霞,等.短圆柱型磨矿介质在胶磷矿磨矿工艺中的应用[J].有色金属(选矿部分),2015(1):80-82.
[11] 肖庆飞,石贵明,段希祥.磨矿介质制度的进展及优化[J].矿山机械,2007(1):29-32+5.
[12] 冯克鲁格尔,吴建明.使用凹形表面磨矿介质的效果[J].国外金属矿选矿,2001,10:39-42.
[13] F·史,向平,雨田.圆锥柱形介质与球形磨矿介质的比较[J].国外金属矿选矿,2005(8):18-25.
[14] 胡海祥,王盛有,范作鹏,等.一种新型磨矿介质设计与磨矿试验研究[J].有色金属科学与工程,2015(1):85-89.

文章导航

/