江西某铜矿磨矿对比试验及应用研究

doi:10.11872/j.issn.1005-2518.2019.02.278

Abstract

Abstract:

The properties of copper ores in a copper concentrator in Jiangxi Province have changed greatly since August 2016，which resulting in obvious differences in particle size composition of grinding products，large consumption of grinding media and reduction of copper recovery rate in the flotation process.Starting with the size and proportion of grinding media，through the determination of ore properties， comparative grinding tests and industrial application work，the purpose of improving the quality of grinding products and copper sorting indexes and reducing the steel ball consumption can be achieved. The mechanical properties of 16 ore blocks with specifications greater than 200 mm were determined on a press of model DE50A.According to the measurement of rock mechanical properties，the average values of Pushi hardness coefficient f and Poisson’s ratio of the porphyry copper ore in this concentrator are only 5 and 0.155，respectively，belonging to soft and brittle ores.The comparison test of copper ore grinding in the concentrator was carried out in a 450 mm× 450 mm discontinuous ball mill in the laboratory.According to the mechanical properties of the ore and the grinding conditions in the field， the maximum grinding ball diameter was calculated to be 70 mm， and four groups of grinding test schemes were formulated and the grinding test was carried out with the steel ball ratio of each scheme. According to the calculation of grinding medium size and ratio and the laboratory grinding comparison test， the optimal grinding medium size and ratio of 3.2 m× 3.1 m lattice ball mill in concentrator is $?$ 70∶ $?$ 50∶ $?$ 40∶ $?$ 30=20∶30∶20∶30.The grain size uniformity of the grinding products in this scheme is the best， the coarse grade yield including +0.2 mm grain size is the lowest， while the intermediate easy grade,-0.2 +0.038 mm grain size yield is the highest，reaching 66.78 $%$ ，while the -0.038 mm grain size content is lower. During the industrial test，ore samples were obtained from the overflow of the 7# and 8# mills on site， and flotation comparison tests were carried out in the laboratory XFD-0.5 mini flotation machine.The industrial test results show that the content of -0.038 mm and -0.074 mm in grinding products increased by 0.47 $%$ ，2.13 $%$ ，and the content of +0.2 mm decreased by 3.14 $%$ after using the recommended medium scheme.The content of -0.2+0.038 mm in the intermediate easy-to-select grade increased by 2.68 $%$ ，the copper recovery rate increased by 3.70 $%$ ，and the unit ball consumption decreased by 0.032 kg/t.The aim of improving the grain size composition of grinding products， improving the sorting index of copper and reducing the unit consumption of medium in the copper ore processing operation of the concentrator is achieved，and it has certain guiding significance for improving the quality of grinding operations.

Key words: copper deposit, grinding product, particle size composition, mineral processing index, grinding media, ore property, grinding effect, industry application

CLC Number:

TD953

Yinqi HUANG,Qingfei XIAO,Yunxin GUO,Xudong WANG. Comparison Test and Application Study on Grinding of a Copper Mine in Jiangxi Province[J].Gold Science and Technology, 2019, 27(2): 278-284.

Figures/Tables 9

Table 1

Contrast of ball charge schemes of ball mill"

方案	钢球尺寸及配比
推荐方案	$?$ 70∶ $?$ 50∶ $?$ 40∶ $?$ 30=20∶30∶20∶30
现场方案	$?$ 100∶ $?$ 80∶ $?$ 60=30∶40∶30
偏大方案	$?$ 80∶ $?$ 60∶ $?$ 40=30∶40∶30
偏小方案	$?$ 60∶ $?$ 50∶ $?$ 40∶ $?$ 30=20∶30∶20∶30

Table 1

Fig .1

Table 2

矿块	试件直径/cm	试件面积/m2	极限载荷/kg	抗压强度/（kg·cm^-2）	平均强度（kg $?$ cm^-2）	割线弹性衡量 E₅₀/（×10 $- 5$ kg·cm^-2）	E₅₀	割线泊松比U₅₀	U₅₀ 平均值
6#矿块	4.85	18.50	9 791.70	529.28	528.88	2.11	3.43	0.068	0.143
	4.86	18.55	9 385.20	505.92		4.54		0.175
	4.88	18.68	10 299.80	551.43		3.65		0.186
7#矿块	4.90	18.86	7 657.50	406.07	393.97	4.11	4.21	0.101	0.109
	4.91	18.96	7 352.60	387.79		4.04		0.099
	4.84	18.86	7 149.40	388.05		4.49		0.127
8#矿块	4.88	18.68	9 185.20	491.76	491.53	3.19	3.31	0.126	0.119
	4.93	19.11	9 080.30	475.04		3.71		0.126
	4.90	18.88	9 588.40	507.78		3.04		0.105
10#矿块	4.87	18.63	14 263.20	756.72	764.39	5.79	5.53	0.226	0.247
	4.90	18.86	13 958.30	740.20		5.79		0.225
	4.89	18.81	14 974.60	796.26		5.02		0.259

Fig. 2

Fig .3

Fig .4

Fig .5

Table 4

Ball consumption statistics during industrial experiment"

磨机编号	累积处理量/t	累积添加 $?$ 80/t	累积添加 $?$ 70/t	累积添加 $?$ 60/t	累积添加 $?$ 50/t	钢球总量/t	钢耗/（kg·t^-1）
7#球磨机	112 026	44.453	44.454	1.827	10.742	101.476	0.906
8#球磨机	110 145	38.509	48.141	9.626	96.276	96.276	0.874

Table 4

References 22

1	徐国琼. 铜矿石的工艺矿物学特征及选矿影响因素研究[J]. 世界有色金属，2017(1):201，203.
	XuGuoqiong. Process mineralogy characteristics of copper ore and the research to the influential factors of ore dressing[J].World Nonferrous Metals，2017(1):201，203.
2	洪秉信，傅文章. 矿物解离度与工艺粒度关系和解离难易度探讨[J]. 矿产综合利用，2012(1):56-60.
	HongBingxin，FuWenzhang.Discussion on relationship between liberation degree of mineral and processing size and difficult level of liberation [J]. Multipurpose Utilization of Mineral Resources， 2012(1):56-60.
3	武俊杰，李青翠，刘杨. 陕西某铜金矿矿石性质研究及对选矿工艺的影响[J]. 有色金属（选矿部分），2017(5):1-5.
	WuJunjie，LiQingcui，LiuYang.Study on the properties and its influence on mineral processing of a copper gold ore in Shaanxi[J]. Nonferrous Metals(Mineral Processing Section)， 2017(5):1-5.
4	马立成，韦鲁滨，孙运礼. 某铜矿石工艺矿物学研究[J]. 有色金属(选矿部分)，2017(2):1-4.
	MaLicheng，WeiLubin，SunYunli. Research on process mineralogy of a copper ore [J]. Nonferrous Metals(Mineral Processing Section)，2017(2):1-4.
5	侯英，印万忠，朱巨建，等.粒度特性参数与粒度分布均匀程度的关系[J]. 中南大学学报(自然科学版)，2015，46(9):3183-3187.
	HouYing，YinWanzhong，ZhuJujian， et al. Relationship between parameters of size characteristic and uniformity of particle size distribution [J]. Journal of Central South University(Science and Technology)， 2015,46(9):3183-3187.
6	李冬莲，汪桥，曹先敏，等. 胶磷矿磨矿特性对浮选效果影响研究[J]. 非金属矿，2014(6):49-51.
	LiDonglian，WangQiao，CaoXianmin，et al.The research of grinding characteristics of phosphate on flotation[J]. Non-Metallic Mines， 2014(6):49-51.
7	倪帅男，吴彩斌，叶景胜，等.顽石作为磨矿介质在含金铜硫分离中的试验研究[J].黄金科学技术，2018,26（1）:81-88.
	NiShuainan,WuCaibin,YeJingsheng,et al. Experimental study on the separation of gold-copper sulfide ore by using pebble as grinding media[J].Gold Science and Technology,2018,26（1）:81-88.
8	LiG P，ChenW，SunL H，et al. The influence of cylindrical grinding medium on particle size and mechanical properties of TiC steel bonded carbide [J]. Materials Science Forum， 2016， 849:781-787.
9	程旭，武豪杰，王泽红.介质制度对磨矿过程影响的研究进展[J]. 金属矿山，2013，42(9):104-107.
	ChengXu，WuHaojie，WangZehong. The research progress of effect on grinding media system on grinding process [J]. Metal Mine，2013， 42(9):104-107.
10	王国强，肖庆飞，王肖江，等.优化介质制度提高磨矿作业质量的试验研究[J].黄金，2017，38(1):52-55.
	WangGuoqiang，XiaoQingfei，WangXiaojiang， et al. Experimental research on optimizing grinding media regime to improve grinding performance [J]. Gold， 2017， 38(1):52-55.
11	XiaoQ，LiB，KangH. The effect of fine grinding medium feature on grinding results [J]. Aasri Procedia， 2014， 7:120-125.
12	马斌，刘建远. 磨矿产品粒度组成对铅浮选的影响研究[J]. 有色金属(选矿部分)， 2016(2):29-33.
	MaBin，LiuJianyuan.Research of effect of the particle size composition of grinding product on the flotation of lead[J].Nonferrous Metals(Mineral Processing Section)，2016(2):29-33.
13	李若兰，庞建涛，王灿霞，等.短圆柱型磨矿介质在胶磷矿磨矿工艺中的应用[J]. 有色金属(选矿部分)， 2015(1):80-82.
	LiRuolan，PangJiantao，WangCanxia， et al. Short cylindrical grinding medium application research in collophane grinding process[J].Nonferrous Metals(Mineral Processing Section)， 2015(1):80-82.
14	戈保梁，张晋禄，王显强，等.云南某铜选厂尾矿再选试验[J]. 金属矿山，2016，45(2):176-180.
	GeBaoliang，ZhangJinlu，WangXianqiang， et al. Experiment on reconcentration of taillings from a copper plant in Yunnan [J].Metal Mine， 2016， 45(2):176-180.
15	尹君，贺东亚，黄建芬，等. 降低厂坝铅锌矿磨矿钢球消耗的技术措施[J]. 甘肃冶金， 2014(1):5-7.
	YinJun， HeDongya， HuangJianfen， et al.Technical measures for reducing the Changba Pb-Zn ore grinding steel ball consumption[J].Gansu Metallurgy， 2014(1):5-7.
16	刘瑜，杨昊，邹春林，等.精确化磨矿对产品粒度分布及能耗的影响[J]. 矿业研究与开发， 2015(7):53-57.
	LiuYu ，YangHao，ZouChunlin，et al.Influence of accurate grinding on product size distribution and energy consumption[J].Mining Research and Development， 2015(7):53-57.
17	赵春艳，迟永欣，郭天宇，等.提高红透山铜矿选矿回收率的研究[J]. 矿产保护与利用， 2012(5):23-26.
	ZhaoChunyan，ChiYongxin，GuoTianyu， et al. Improvement of copper recovery of Hongtoushan copper mine[J].Conservation and Utilization of Mineral Resources， 2012(5):23-26.
18	印万忠，吴凯，王纪镇，等.破碎方式对紫金山铜金矿石可磨性及浮选的影响[J].福州大学学报（自然科学版），2014，42(2):321-326.
	YinWanzhong，WuKai，WangJizhen， et al. Effect of different comminuting process on grindability and flotation of Zijinshan Cu-Au ore[J].Journal of Fuzhou University（Natural Science Edition），2014，42(2):321-326.
19	王治方.选矿厂提质增产工艺技术研究与应用[J]. 矿业工程，2017，15(4):26-28.
	WangZhifang. Process and technology study and application for beneficiation plant quality improvement and production increasing[J].Mining Engineering，2017，15(4):26-28.
20	吴琼.球磨机内钢球冲击粉碎试验及其机理分析[D]. 南京：南京工业大学， 2014.
	WuQiong.Analysis of Grinding Experiment and Mechanism[D].Nanjing：Nanjing Technology University，2014.
21	王雅琳，刘正雄，王晓丽，等.基于差分进化的球磨机钢球磨损规律预测方法[J]. 华东理工大学学报，2014，40(3):349-356.
	WangYalin，LiuZhengxiong，WangXiaoli，et al. Prediction method of the law of steel ball wear in ball mill based on differential evolution[J].Journal of East China University of Science and Technology，2014，40(3):349-356.
22	魏勇，郭利杰. 磨矿条件对钢球磨损的影响及磨损规律研究[J]. 非金属矿，2012，35(4):21-23.
	WeiYong，GuoLijie.Research on influence of grinding conditions on wear of steel balls and wear laws[J].Non-Metallic Mines，2012，35(4):21-23.

Related Articles 15

[1]	Yuhang SHENG, Dianfei PEI, Zhaojun QI, Xiaodong JING. Influence of Particle Size Composition of Tailings on Rheological Characteristics and Strength of Cemented Tailings Backﬁll [J]. Gold Science and Technology, 2024, 32(4): 631-639.
[2]	Lei CHEN,Baofu DUAN,Dao LV,Jianpeng ZENG,Shuo ZHANG,Xingfu ZENG,Meijun HUANG. Geological Characteristics and Genesis of Yudai Copper Deposit in Kalatag District，Eastern Tianshan [J]. Gold Science and Technology, 2023, 31(3): 396-407.
[3]	Yingbao YANG,Yanxiong FU,Yingjie PEI,Qiang ZHOU,Qingfei XIAO. Study on Grinding Medium Ratio Optimization of Φ2.4×3.6 m Ball Mill in Yimen Copper Industry [J]. Gold Science and Technology, 2023, 31(1): 163-170.
[4]	Chengyu YI,Yingjie PEI,Shuai MA. Experimental Study and Application of Grinding Medium Ratio Optimization in Jiaojia Gold Mine [J]. Gold Science and Technology, 2022, 30(1): 122-130.
[5]	Jingjing ZHANG,Chengbiao LENG. Discussion on the Relationships Between Planation Surface and Preservation of Porphyry Copper Deposits in the Zhongdian Region，Yunnan Province，SW China：Constraints from Geomorphic Factor Analysis [J]. Gold Science and Technology, 2021, 29(3): 334-344.
[6]	Xudong WANG, Qingfei XIAO, Qian ZHANG, Sen YANG, Shuai MA. Comparison of Grinding Effect Between Steel Section and Steel Ball During Fine Grinding Stage of Ball Mill [J]. Gold Science and Technology, 2020, 28(5): 771-777.
[7]	Fubo LI, Qingfei XIAO, Yinqi HUANG, Qian ZHANG, Xudong WANG. Experimental Study on Optimizing the Media System of Large-scale Ball Mill in a Copper Mine in Jiangxi Province [J]. Gold Science and Technology, 2020, 28(4): 603-609.
[8]	Xuelong LIU,Fucheng YANG,Changzhen ZHANG,Ying LUO,Shuaishuai WANG. Structural Characteristics and Mineralization of Xuejiping Porphyry Copper Deposit in Northwest Yunnan [J]. Gold Science and Technology, 2018, 26(4): 473-480.
[9]	NI Shuainan，WU Caibin，YE Jingsheng，YANG Jie，YUAN Chengfang. Experimental Study on the Separation of Gold-Copper Sulfide Ore by Using Pebble as Grinding Media [J]. Gold Science and Technology, 2018, 26(1): 81-88.
[10]	XUE Lanhua，SHI Laohu，ZHANG Zhijun，SHEN Liusheng. Breccia Pipe and Its Constrain on Copper Mineralization in Kalagailei Copper Mine，Xinjiang Province [J]. Gold Science and Technology, 2016, 24(1): 23-27.
[11]	LI Yuqin，NIE Xiuli，WANG Xuezhen，LIANG Qijun，SU Shixing，LIU Fuyun. Geological Characteristics and Prospecting Direction in Bulansala Gold Copper Deposit at the Northwestern Margin of the Junggar Basin in Xinjiang Region [J]. Gold Science and Technology, 2015, 23(6): 17-22.
[12]	WEN Peng，YANG Yongqiang，WANG Chuanliang，LIU Huaijin，XIN Jiang. Distribution Regularities of Gold，Silver，Rhenium and Cobalt at the Fujiawu Copper Mine in Dexing Region，Jiangxi Province [J]. Gold Science and Technology, 2015, 23(2): 17-27.
[13]	LI Wenlong，PANG Baocheng，LAN Nila，XIAO Hai. The Copper Geochemical Characteristics and Resource Potential Prediction in Northwest Hebei Province [J]. Gold Science and Technology, 2013, 21(3): 32-37.
[14]	DUAN Jin，WU Pengfei. Geological Characteristics and Ore Prospect of Lazhuokan Copper Deposit in Xizang Province [J]. J4, 2012, 20(3): 31-34.
[15]	ZHAO Haibin，LI Jiemei. Discussion on the Metallogenic Regularity and Mineralization of Qingshuiquan Copper Deposit,Xinjiang Province [J]. J4, 2012, 20(1): 61-65.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!

浮选药剂	用量/（g·t^-1）	浮选药剂	用量/（g·t^-1）
石灰（pH=8.5）	1 000	扫选Mac-12	5
粗选Mac-12	25	丁基黄药	20

Comparison Test and Application Study on Grinding of a Copper Mine in Jiangxi Province

RichHTML

PDF (PC)