Gold Science and Technology
img

Wechat

Adv. Search
Online Submission Peer Review Office Work

Gold Science and Technology ›› 2023, Vol. 31 ›› Issue (1): 102-112.doi: 10.11872/j.issn.1005-2518.2023.01.101

• Mining Technology and Mine Management • Previous Articles     Next Articles

Research on Meso-mechanical Properties of Rock Under Different Stress Paths Based on Discrete Element Method

Jielin LI1,2(),Jingyao WANG1,Yigai XIAO1,2,Xiaoshuang LI3   

  1. 1.School of Resources and Safety Engineering, Central South University, Changsha 410083, Hunan, China
    2.State Key Laboratory of Safety and Health for Metal Mines, Maanshan 243000, Anhui, China
    3.School of Civil Engineering, Shaoxing University, Shaoxing 312000, Zhejiang, China
  • Received:2022-08-10 Revised:2022-10-19 Online:2023-02-28 Published:2023-03-27

RichHTML

14

PDF (PC)

289

Abstract:

The stress state of rock mass in engineering has an important influence on the stability of surrounding rock.At present，scholars at home and abroad mainly study the deformation and failure of rock during loading and unloading through rock mechanics tests such as uniaxial compression and conventional triaxial compression.However，in the process of excavation，the stress state of the rock mass in the radial direction is unloaded and the axial direction is loaded，which is more in line with the actual working conditions.Therefore，the results obtained by traditional research methods can’t truly reflect the stress state of rock mass.There are still some limitations to reflect the stress unloading effect and mechanical characteristics of rock excavation in underground engineering by laboratory test.Moreover，due to the differences of test conditions and rock types，the initial damage degree in the process of rock sample processing is different，the load control methods in the test are different and the number of repeated samples is small，which leads to the dispersion error of test results larger than the true range of stress path’s influence on strength.In order to study the influence of stress state on the stability of surrounding rock in rock mass engineering，based on the discrete element theory，the stress state in the process of underground roadway excavation was analyzed，and triaxial compression numerical simulation tests under three different unloading paths，i.e. confining pressure unloading-axial pressure increasing，confining pressure unloading-axial pressure unchanged and confining pressure unloading-axial pressure decreasing，were carried out.Compared with conventional triaxial compression tests，the macroscopic strength characteristics and microscopic damage process differences of rocks under different stress paths were analyzed.The results show that with the increase of confining pressure，the macroscopic crack of rock changes from tensile crack under uniaxial compression to single inclined plane shear crack under low confining pressure，and finally the conjugate crack shape appears under high confining pressure，which indicates that confining pressure is an important factor affecting the crack state of rock.The failure of the same rock under different unloading paths also follows Hoek-Brown strength criterion，that is，different stress paths will not affect the ultimate strength of the rock.The aggregation characteristics of contact force vector projection scatterplots under different unloading paths are similar，so the stress tensor state is not affected by unloading paths，but the damage process is different under different stress paths.Micro-cracks develop most intensively under the stress path of confining pressure and unloading-constant axial pressure.The crack cluster speed is the fastest under the stress path of confining pressure unloading and axial pressure increasing.The research results can provide reference for stress unloading failure analysis of surrounding rock in the process of underground roadway excavation.

Key words: stress path, discrete element, damage process, strength criterion, stress tensor, crack propagation

CLC Number: 

  • TD853

Fig.1

Variation of surrounding rock stress during unloading process of underground roadway"

Fig.2

Four stress path schemes in roadway excavation process"

Fig.3

Conventional triaxial compression test scheme"

Fig.4

Unloading stress path test scheme"

Table 1

Meso-parameter value of discrete element"

参数名称数值参数名称数值
模型宽度/mm50颗粒刚度比1.5
模型高度/mm100颗粒阻尼系数0.5
颗粒半径/mm1.00~1.66拉伸强度/MPa30
密度/（kg·m-3）2 500内聚力/MPa30
孔隙度0.1黏结摩擦角/（°）30
摩擦系数0.5黏结有效模量/GPa13.0
有效模量/GPa13.0黏结刚度比6.0

Fig.5

Calibration results of sandstone samples under 20 MPa confining pressure"

Fig.6

Macrocracks of conventional triaxial discrete element test"

Fig.7

Stress-strain curves of conventional triaxial discrete element test"

Fig.8

Fitting results of GHB criterion"

Fig.9

Displacement，stress and crack propagation under confining pressure unloading-axial pressure constant stress path"

Fig.10

Displacement，stress and crack propagation under confining pressure unloading-axial pressure increasing stress path"

Fig.11

Displacement，stress and crack propagation under confining pressure unloading-axial compression reduction stress path"

Fig.12

Vector scatter plot of normal contact force"

Fig.13

Vector scatter plot of tangential contact force"

Fig.14

Distribution of of cracks number and cracks inclination angle"

Abousleiman R， Walton G， Sinha S，2020.Understanding roof deformation mechanics and parametric sensitivities of coal mine entries using the discrete element method［J］.International Journal of Mining Science and Technology，30（1）：123-129.
Bai Y L， Wierzbicki T，2010.Application of extended Mohr-Coulomb criterion to ductile fracture［J］.International Journal of Fracture，161（1）：1-20.
Chen Danxi， Dai Guanyi，1982.Experimental study on compressive deformation of marble under triaxial stress［J］.Rock and Soil Mechanics，3（1）：27-44.
Chen Yan，2018.Study on Deformation Failure Behaviors and Nonlinear Models for Rocks Under the Influence of Mining Disturbance［D］.Beijing：China University of Mining and Technology.
Cheng Y， Wong L N Y，2020.A study on mechanical properties and fracturing behavior of Carrara marble with the flat-jointed model［J］.International Journal for Numerical and Analytical Methods in Geomechanics，44（6）：803-822.
Coetzee C J，2017.Calibration of the discrete element method［J］.Powder Technology，310：104-142.
Crouch S L，1972.A note on post-failure stress-strain path dependence in norite［J］.International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts，9（2）：197-204.
Fan Y， Zheng J W， Cui X Z，et al，2021.Damage zones induced by in situ stress unloading during excavation of diversion tunnels for the Jinping Ⅱ hydropower project［J］.Bulletin of Engineering Geology and the Environment，80（6）：4689-4715.
Gao Chunyu， Xu Jin， He Peng，et al，2005.Study on mechanical properties of marble under loading and unloading conditions［J］.Chinese Journal of Rock Mechanics and Engineering，24（3）：456-460.
Hu Guanghui， Xu Tao， Chen Chongfeng，et al，2018.A microscopic study of creep and fracturing of brittle rocks based on discrete element method［J］.Engineering Mechanics，35（9）：26-36.
Lee Y K， Pietruszczak S，2021.Limit equilibrium analysis incorporating the generalized hoek-brown criterion［J］.Rock Mechanics and Rock Engineering，54（9）：4407-4418.
Li B， Guo L， Zhang F S，2014.Macro-micro investigation of granular materials in torsional shear test［J］.Journal of Central South University，21（7）：2950-2961.
Li D Y， Sun Z， Xie T，et al，2017.Energy evolution characteristics of hard rock during triaxial failure with different loading and unloading paths［J］.Engineering Geology，228：270-281.
Li R L， Zhou G Q， Mo P Q，et al，2021.Behaviour of granular matter under gravity-induced stress gradient：A two-dimensional numerical investigation［J］.International Journal of Mining Science and Technology，31（3）：439-450.
Liu Guolei， Tian Zhaojun， Li Gongjian，et al，2011.Measurement and analysis of ground stress in expansion area in Beizao mine under sea［J］.Coal Science and Technology，39（9）：26-29.
Liu Y， You Z P， Li L，et al，2013.Review on advances in modeling and simulation of stone-based paving materials［J］.Construction and Building Materials，43：408-417.
Meng F F， Pu H， Sasaoka T，et al，2021.Time effect and prediction of broken rock bulking coefficient on the base of particle discrete element method［J］.International Journal of Mi-ning Science and Technology，31（4）：643-651.
O’Sullivan C，2011.Particle-based discrete element modeling：Geomechanics perspective［J］.International Journal of Geo-mechanics，11（6）：449-464.
Shi Chong， Zhang Qiang， Wang Shengnian，2018.Numerical Simulation Technology and Application with Particle Flow Code（PFC 5.0）［M］.Beijing：China Architecture & Building Press.
Swansson S R， Brown W S，1971.An observation of loading path independence of fracture in rock［J］.International Jou-rnal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts，8（3）：277-281.
Wang Bin， Zhu Jiebing， Wu Aiqing，et al，2008.Experimental study on mechanical properties of Jinping marble under loading and unloading stress paths［J］.Chinese Journal of Rock Mechanics and Engineering，27（10）：2138-2145.
Wu Yushan， Li Jiding，1984.Unloading properties of marble［J］.Rock and Soil Mechanics，5（1）：29-36.
Yang Y S， Zhang Bang’an，2022.Deformation failure and gas seepage of raw coal in alternate loading and unloading by stages［J］.Geotechnical and Geological Engineering，40（2）：751-764.
Zhang J C， Lin Z N， Dong B，et al，2021.Triaxial compression testing at constant and reducing confining pressure for the mechanical characterization of a specific type of sandstone［J］.Rock Mechanics and Rock Engineering，54（4）：1999-2012.
Zhao Bo， Xu Tao， Yang Shengqi，et al，2021.Experimental and numerical study of fatigue damage of highly stressed rocks under cyclic loading［J］.Journal of Central South University（Science and Technology），52（8）：2725-2735.
Zhao Guobin， Zhou Jianjun， Wang Sijing，et al，2013.Study of mechanical characteristics of limestone under unloading condition［J］.Chinese Journal of Rock Mechanics and Engineering，32（Supp.2）：2994-2999.
Zhao H G， Liu C， Huang G，2021.Dilatancy behaviour and permeability evolution of sandstone subjected to initial confining pressures and unloading rates［J］.Royal Society Open Science，8（1）：201792.
Zhong Zhibin， Deng Ronggui， Li Jia，et al，2014.Experimental study of triaxial mechanical properties of natural fissured rhyolite［J］.Chinese Journal of Rock Mechanics and Engineering，33（6）：1233-1240.
Zhou Ruiguang， Qu Yongxin， Cheng Binfang，et al，1996.Experimental study on mechanical properties of soft rock in Beizao coal mine，Longkou，Shandong［J］.Journal of Engineering Geology，4（4）：55-60.
陈旦熹，戴冠一，1982.三向应力状态下大理岩压缩变形试验研究［J］.岩土力学，3（1）：27-44.
陈岩，2018.采动影响下岩石的变形破坏行为及非线性模型研究［D］.北京：中国矿业大学.
高春玉，徐进，何鹏，等，2005.大理岩加卸载力学特性的研究［J］.岩石力学与工程学报，24（3）：456-460.
胡光辉，徐涛，陈崇枫，等，2018.基于离散元法的脆性岩石细观蠕变失稳研究［J］.工程力学，35（9）：26-36.
刘国磊，田昭军，李恭建，等，2011.北皂煤矿海域扩采区地应力测量与分析［J］.煤炭科学技术，39（9）：26-29.
石崇，张强，王盛年，2018.颗粒流（PFC 5.0）数值模拟技术及应用［M］.北京：中国建筑工业出版社.
汪斌，朱杰兵，邬爱清，等，2008.锦屏大理岩加、卸载应力路径下力学性质试验研究［J］.岩石力学与工程学报，27（10）：2138-2145.
吴玉山，李纪鼎，1984.大理岩卸载力学特性的研究［J］.岩土力学，5（1）：29-36.
赵博，徐涛，杨圣奇，等，2021.循环载荷作用下高应力岩石疲劳损伤破坏数值模拟与试验研究［J］.中南大学学报（自然科学版），52（8）：2725-2735.
赵国斌，周建军，王思敬，等，2013.卸荷条件下灰岩力学特性研究［J］.岩石力学与工程学报，32（增2）：2994-2999.
钟志彬，邓荣贵，李佳，等，2014.天然裂隙性流纹岩三轴力学特性试验研究［J］.岩石力学与工程学报，33（6）：1233-1240.
周瑞光，曲永新，成彬芳，等，1996.山东龙口北皂煤矿软岩力学特性实验研究［J］.工程地质学报，（5）：55-60.
[1] Bo LI, Chen WEN, Xiuzhi SHI. Optimization of Stope Sidewall Controlled Blasting Parameters for High-Stress Fan-Shaped Medium-Depth Hole [J]. Gold Science and Technology, 2024, 32(3): 511-522.
[2] Yanan ZHAO, Yihang ZHAO, Zhongming JIANG, Hongmin ZHAO. Preliminary Study on Static and Dynamic Stability of Canister for High-level Radioactive Nuclear Waste Disposal Based on Discrete Element Method [J]. Gold Science and Technology, 2023, 31(4): 592-604.
[3] Kefan ZHOU,Kewei LIU,Tengfei GUO. Study on Failure Characteristics of Inclined Soft and Hard Interbedded Rocks Based on Acoustic Emission [J]. Gold Science and Technology, 2022, 30(6): 923-934.
[4] Mingjian LI,Tubing YIN,Xiaosong TAN,Zheng YANG. Study on Thermal Sensitivity and Crack Propagation of Granite Based on Discrete Element Method [J]. Gold Science and Technology, 2022, 30(4): 559-573.
[5] Peng JIN,Kewei LIU,Xudong LI,Jiacai YANG. Numerical Simulation Study of Crack Propagation in Deep Rock Mass Under Water-coupling Blasting [J]. Gold Science and Technology, 2021, 29(1): 108-119.
[6] Sheng ZENG,Shaoping WANG,Ni ZHANG. Research Progress of Rock Crack Propagation Under Impact Loading [J]. Gold Science and Technology, 2019, 27(1): 52-62.
[7] Xiang LI,Zhen HUAI,Xibing LI,Zhuoyao ZHANG. Study on Fracture Characteristics and Mechanical Properties of Brittle Rock Based on Crack Propagation Model [J]. Gold Science and Technology, 2019, 27(1): 41-51.
[8] ZHOU Yu-Bin, LI Yi-Fan, DENG Fei. Discrete Element Numerical Simulation of Subsidence Induced by Mining Under Fragmentized Rock-strip [J]. J4, 2006, 14(1): 18-22.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!

©2018 Gold Science and Technology　

Telephone：0931-8277791　

E-mail: hjkx@lzb.ac.cn Postcode：730000　

Powered by Beijing Magtech Co. Ltd

陇ICP备17001318号-1