img

Wechat

Adv. Search

Gold Science and Technology ›› 2012, Vol. 20 ›› Issue (5): 63-66.

Previous Articles     Next Articles

The Application of PQ Drilling Tools for Geological Core Drilling in Zhaishang Mining Area

LIU Bei1,2, LI Guomin1, XIAO Lihui1,3   

  1. 1.China University of Geosciences,Beijing   100083,China;
    2.No.5 Gold Geological Party of CAPF,Xi’an   710100,Shaanxi,China;
    3.Chongqing Research Institute of China Coal Technology and Engineering Group,Chongqing   400039,China
  • Received:2012-06-09 Revised:2012-08-01 Online:2012-10-29 Published:2013-04-03

Abstract:

The application effect of PQ drilling tools for geological core drilling in Zhaishang mining area was discussed.Comparing with single tube core barrels used in opening of a deep hole or construction of shallow department stratum,the PQ drilling tools show obvious advantages:they can improve the penetration rate greatly,assure core recovery percent and reduce the probability of troubles in drill holes at the same time,and have a good application effect in drilling.However,PQ drilling tools also have some disadvantage:they are too heavy,mud cake can easily be formed inside the drilling pipe,construction depth of drilling tools is not so ideal, and the abnormal wear with the matching hole reamer is very serious.We have summarized the application of PQ drilling tools and proposed some suggestions and solutions for the existing defects to popularize the construction technology in mining area.

Key words: PQ drilling tools, Geological drilling, Penetration rate, Core recovery percent, Zhaishang mining area

CLC Number: 

  • P634.4/TE921
[1] 冶金部西南冶金地质科研所探矿研究室.岩心钻探取心工具图册[M].昆明:冶金部西南冶金地质科研所探矿研究室,1986:196-197.
[2] 中华人民共和国国土资源部.DZ/T 0227-2010地质岩心钻探规程[S].北京:中国标准出版社,2011.
[3] 刘新会,陈彩华,赵天心,等.西秦岭寨上特大型金矿金的赋存状态研究[J].黄金科学技术,2010,18(5):16-19.
[4] 张纯歌,张恒志.凤凰山地区岩心钻探施工技术探讨[J].黄金科学技术,2011,19(5):56-58.
[5] 鄢泰宁.岩土钻掘工程学[M].武汉:中国地质大学出版社,2001:109-110.
[6] 地质部勘探技术研究所.岩心钻探取心工具[M].北京:中国工业出版社,1966:3-4.
[7] 张春波.绳索取心金刚石钻进技术[M].北京:地质出版社,1985:7-8.
[8] 国家技术监督局.GB/T 16951-1997金刚石绳索取心钻探钻具设备[S].北京:中国标准出版社,1997.
[9] 郑继天,陈永良.钻探泥浆固相的机械控制[J].探矿工程(岩土钻掘工程),1986,(6):20-22.
[1] Xi WANG,Chunde MA,Xingquan LIU,Mingwei JIANG,Yuyun FAN. The Variation Law of In-situ Stress and Rock Mechanical Parameters with Buried Depth in Coastal Mining Area and Their Relationship [J]. Gold Science and Technology, 2021, 29(4): 535-544.
[2] ZHANG Xiong,LIU Baolin,WANG Zhiyong. Technical Performance and Application of SQ114/8  Hydraulic Power Tongs [J]. Gold Science and Technology, 2014, 22(3): 90-93.
[3] CAI Shengye. Discussion of Drilling Bending and the Ways of Rectify Deviation [J]. J4, 2004, 12(3): 35-38.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!