Meeting the Challenge of High Geothermal Ground Temperature Environ-ment in Deep Mining—Research on Geothermal Ground Temperature Simula-tion Platform of Rock True Triaxial Testing Machine
Received date: 2021-10-29
Revised date: 2021-12-22
Online published: 2022-04-25
In order to meet the challenge of the high ground temperature environment of deep mining,realize the real simulation of the environment,and improve the high ground stress-high ground temperature coupling capability of the true triaxial test equipment,the research and development of the ground temperature simulation platform of the rock true triaxial test machine has been carried out. The exploration and establishment of three kinds of heating schemes for the ground temperature simulation platform are the six-sided heating rod heating scheme based on solid medium heat transfer,the ring heater heating scheme and the liquid heat transfer heating scheme based on liquid medium heat transfer. Through the establishment of a true triaxial high ground stress-high ground temperature coupled loading program evaluation system combining numerical simulation (COMSOL),coefficient of variation method (RSD) and ideal solution for multi-attribute decision-making problems (TOPSIS),comprehensive indicators for three heating programs evaluation and scheme optimization. In order to obtain the best test results close to reality,the five basic evaluations of the quality of the evaluation plan are the uniformity of heating on the rock surface,the heat dissipation from the outside of the pressurized rod,the average heating rate of the rock sample,the strain value of the pressurized plate and the economic cost index. The COMSOL Multiphysics simulation software was used to simulate three heating schemes. Through the coefficient of variation method,the simulated data were objectively assigned,and the corresponding index values were brought into the TOPSIS model for comprehensive evaluation. The evaluation results show that the comprehensive evaluation indexes of the three schemes of six-sided heating rod heating,ring heater heating,and liquid heat transfer heating are 0.4288,0.9447 and 0.5532,respectively. The heating method of the ring heater is consistent with a positive ideal solution. The closeness degree reaches 0.9447,which is the optimal decision after comprehensively considering the five indicators. This evaluation system combines theoretical methods,numerical calculations and numerical simulations,and provides a reliable theoretical basis and experimental basis for finding the optimal heating scheme for true triaxial test equipment. The instrumental research on the coupling capability of ground temperature is of guiding significance.
Xuan FU , Linqi HUANG , Jiangzhan CHEN , Yangchun WU , Xibing LI . Meeting the Challenge of High Geothermal Ground Temperature Environ-ment in Deep Mining—Research on Geothermal Ground Temperature Simula-tion Platform of Rock True Triaxial Testing Machine[J]. Gold Science and Technology, 2022 , 30(1) : 72 -84 . DOI: 10.11872/j.issn.1005-2518.2022.01.160
http://www.goldsci.ac.cn/article/2022/1005-2518/1005-2518-2022-30-1-72.shtml
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
龚剑,胡乃联,崔翔,等,2014.基于AHP-TOPSIS评判模型的岩爆倾向性预测[J].岩石力学与工程学报,33(7):1442-1448.
|
郝振兴,2017. 基于嵌入式的高温真三轴压力机温度控制系统研究[D]. 太原:太原理工大学.
|
何满潮,谢和平,彭苏萍,等,2009. 深部开采岩体力学研究[C]//中国软岩工程与深部灾害控制研究进展——第四届深部岩体力学与工程灾害控制学术研讨会暨中国矿业大学(北京)百年校庆学术会议论文集.徐州:中国矿业大学: 10-19.
|
胡社荣,彭纪超,黄灿,等,2011. 千米以上深矿井开采研究现状与进展[J]. 中国矿业,20(7):105-110.
|
李夕兵,2014.岩石动力学基础与应用[M].北京:科学出版社.
|
李夕兵,宫凤强,2021. 基于动静组合加载力学试验的深部开采岩石力学研究进展与展望[J]. 煤炭学报,46(3):846-866.
|
李夕兵,宫凤强,杜坤,等,2016. 高应力岩体动力扰动下发生岩爆的试验研究进展报告[J]. 科技创新导报,13(15):173.
|
李夕兵,黄麟淇,周健,等,2019. 硬岩矿山开采技术回顾与展望[J]. 中国有色金属学报,29(9):1828-1847.
|
李夕兵,刘冰,2018.硬岩矿山充填开采现状评述与探索[J].黄金科学技术,26(4):492-502.
|
李夕兵,姚金蕊,宫凤强,2011. 硬岩金属矿山深部开采中的动力学问题[J].中国有色金属学报,21(10):2551-2563.
|
李夕兵,周健,黄麟淇,等,2020.中国黄金矿山开采技术回顾与展望[J]. 黄金,41(9):41-50.
|
马建雄,薛林福,赵金岷,等,2019. 油页岩原位开采温度场的数值模拟[J]. 科学技术与工程,19(5):94-103.
|
马啸,马东东,胡大伟,等,2019. 实时高温真三轴试验系统的研制与应用[J]. 岩石力学与工程学报,38(8):1605-1614.
|
牛学超,张庆喜,岳中文,2013.岩石三轴试验机的现状及发展趋势[J].岩土力学,34(2):600-607.
|
秦宏,张鑫,柏静儒,等,2014. 油页岩气体热载体干馏炉内温度分布的试验研究[J]. 化工机械,41(6):727-732.
|
任爱华,1988. 新研制的800t高温高压伺服三轴流变仪[J]. 地球物理学报,(2):236.
|
任松,杨春和,姜德义,等,2011. 高温三轴盐岩溶解特性试验机研制及应用[J]. 岩石力学与工程学报,30(2):289-295.
|
施良骐,宋瑞卿,吴秀泉,1986.气液两用高温高压岩石三轴实验容器的研制[J].岩石力学与工程学报,(3):301-308.
|
石泽全,周枚青,1990. 800MPa高温高压三轴室设计研究[J]. 地球物理学报,(2):202-207.
|
王运敏,2011. 金属矿采矿工业面临的机遇和挑战及技术对策[J]. 现代矿业,27(1):1-14.
|
谢和平,高峰,鞠杨,2015. 深部岩体力学研究与探索[J]. 岩石力学与工程学报,34(11):2161-2178.
|
尹光志,李铭辉,许江,等,2015. 多功能真三轴流固耦合试验系统的研制与应用[J]. 岩石力学与工程学报,34(12):2436-2445.
|
赵微,林健,王树芳,等,2013. 变异系数法评价人类活动对地下水环境的影响[J]. 环境科学,34(4):1277-1283.
|
赵阳升,万志军,张渊,等,2008. 20MN伺服控制高温高压岩体三轴试验机的研制[J]. 岩石力学与工程学报,194(1):1-8.
|
/
〈 |
|
〉 |