img

Wechat

  • CN 62-1112/TF 
  • ISSN 1005-2518 
  • Founded in 1988
Adv. Search
Mining Technology and Mine Management

Study on the Load Transfer Characteristics and Influence Factors of Anchora-ge Segment of Pressure-type Anchor Cable

  • Kaibin WANG ,
  • Qin LIU ,
  • Hongtao WANG
Expand
  • 1.Shandong Engineering Consulting Institute, Jinan 250013, Shandong, China
    2.Shandong Gold Group Co. , Ltd. , Jinan 250101, Shandong, China
    3.Shandong Jianzhu University, School of Civil Engineering, Jinan 250101, Shandong, China

Received date: 2023-12-01

  Revised date: 2023-12-20

  Online published: 2024-03-22

Abstract

In order to study the load transfer characteristics and the slippage process of anchorage segment of the pressure-type anchor cable in soil strata,the formula of shear stress and axial force distribution of the anchor cable under external load was derived based on theoretical analysis.In addition,the load transfer characteristics was analyzed.The influence degree of soil compressive modulus,anchor diameter,load and Poisson’s ratio on axial force and shear stress were analyzed in detail.The shear stress and axial force in the anchorage segment of the cable has the same distribution function and is all power functions.The shear stress and axial force are the largest near the bearing plate,but far from the bearing plate,the shear stress and axial force gradually decrease to zero.The magnitude and distribution range of the shear stress and axial force in the anchorage segment mainly depend on the anchorage force,and are related to the diameter,elastic modulus and Poisson ratio of anchor body,the compressibility modulus and Poisson ratio of soils,and friction angle of the interface between anchors and soils.In the form of the formula,if the anchorage segment is infinite,the anchoring force P can be infinite in theory.The ultimate anchoring force depends on the strength of the anchors around the bearing plate,the soil and the interface.The position of the maximum shear stress is only related to the soil properties,material parameters and radius of anchorage in anchorage segment of prestressed cable,not related to the magnitude of load.The diameter of anchors also has significant influence on the distribution of shear stress and axial force.With different loads,the distribution form,range and peak position of shear stress is the same,which is independent of load.Under the same conditions,the larger the compressive modulus of soil,the larger of shear stress,and the faster the shear stress decline trendation.The Poisson’s ratio has little effect on the shear stress.When the value of Poisson’s ratio is different,the mechanical property of the whole anchorage system under external load is basically unchanged,and also the value of shear stress.The range of action remains and the axial force is unchanged.In order to verify the correctness of the theoretical analysis results,the load transfer test results of the anchor cable were obtained by in-situ tests of clay and sandy soil.The in-situ test results show that the theoretical analysis results are in good agreement with the engineering results.The research results can provide a basis for analyzing the stress state and optimizing design of soil anchorage engineering.

Cite this article

Kaibin WANG , Qin LIU , Hongtao WANG . Study on the Load Transfer Characteristics and Influence Factors of Anchora-ge Segment of Pressure-type Anchor Cable[J]. Gold Science and Technology, 2024 , 32(1) : 123 -131 . DOI: 10.11872/j.issn.1005-2518.2024.01.161

References

null Chen Yumin, Wang Chenglong, Li Xiaofei,et al,2020.Combined support technology of resin anchor cable for high stress rock mass under deep complex structure in Jiaojia gold mine[J].Gold Science and Technology,28(5):727-733.
null Cui Jinghao, Cui Yan,2000.Several key problems of anchoring anti-floating design[J].Special Structure,(1):9-14.
null He Siming, Wang Chenghua, Wu Wenhua,2004.Analysis on load-deformation of prestressed cable based on damage theory[J].Journal of Rock Mechanics and Engineering,23(5):786-792.
null Tao Zhigang, Ren Shulin, Hao Yu,et al,2021.Physical model experiment on failure mechanism and NPR anchor cable control effect of layered counter-tilt slope[J].Rock and Soil Mechanics,42(4):976-990.
null Wang Guofu, Li Qiang, Lu Linhai,et al,2018.Research and application of a new coupled model of anchor prestress loss and rock creep[J].Building Structure,48(5):110-114.
null Wang Kaibin,2015.Research on the Load Transfer Characteristic and the Effect of Soil Anchor[D].Qingdao:Shandong University of Science and Technology.
null Wang Kezhong, Wu Hui, Zhao Yufei,2018.Coupling between reduction of force in prestressed anchor cable and rock creep in deep-buried underground powerhouse[J].Chinese Journal of Rock Mechanics and Engineering,37(6):1681-1488.
null Wei Zhiyuan, Wang Yong, Gong Xiaonan,et al,2021.Field test and numerical simulation of anchor cable in water-rich sand and pebble two-layer strata[J].Chinese Journal of Underground Space and Engineering,17(5):1507-1516.
null Xia Yuanyou, Ye Hong, Liu Xiaohe,et al,2010.Analysis of shear stress along pressure-type anchorage cable in weathered rock mass[J].Rock and Soil Mechanics,31(12):3861-3866.
null Yan Minjia, Xia Yuanyou, Liu Tingting,2018.Limit analysis of bedding rock slope reinforced by prestressed anchor cables under seismic loads[J].Rock and Soil Mechanics,39(7):2691-2698.
null Ye Hong, Li Yan,2022.Shear stress analysis of bending anchorage section of prestressed anchor cable in soft rock and soil[J].Journal of Chongqing Jiaotong University(Natural Science),41(1):91-95.
null You Chun’an,2004a.Theory and Application Study on Stress-transfer Mechanism of Anchoring Aystem[D].Tai’an:Shandong University of Science and Technology.
null You Chun’an,2004b.Mechanical analysis on anchorage segment of pressure-type cable[J].Geotechnical Engineering,26(6):828-831.
null You Chun’an, Zhan Yubao,2005.Distribution characteristics and analysis of stresses in prestressed cables[J].Journal of Rock Mechanics and Engineering,24(6):925-928.
null You Chunan, Zhan Yubao, Liu Qiuyuan,et al,2013.Shear lag-debonding model for anchorage section of prestressed anchor cable[J].Journal of Rock Mechanics and Engineering,32(4):800-806.
null Zhang Junbao, Li Changcun, Li Yunpeng,et al,2022.Large deformation control system of surrounding rock of super large section cable tunnel with negative Poisson's ratio anchor[J].Science Technology and Engineering,22(17):7155-7164.
null 陈玉民,王成龙,李晓飞,等,2020.焦家金矿深部复杂构造下高应力岩体树脂锚索联合支护技术[J].黄金科学技术,28(5):727-733.
null 崔京浩,崔岩,2000.锚固抗浮设计的几个关键问题[J].特种结构,(1):9-14.
null 何思明,王成华,吴文华,2004.基于损伤理论的预应力锚索荷载—变形特性分析[J].岩石力学与工程学报,23(5):786-792.
null 陶志刚,任树林,郝宇,等,2021.层状反倾边坡破坏机制及NPR锚索控制效果物理模型试验[J].岩土力学,42(4):976-990.
null 王国富,李强,路林海,等,2018.锚索预应力蠕变损失计算新模型及工程应用[J].建筑结构,48(5):110-114.
null 王开彬,2015.土层锚固体荷载传递特征及其效应研究[D].青岛:山东科技大学.
null 王克忠,吴慧,赵宇飞,2018.深部地下厂房锚索预应力损失与岩体蠕变耦合分析[J].岩石力学与工程学报,37(6):1681-1488.
null 魏支援,王勇,龚晓南,等,2021.富水砂加卵石双地层锚索现场试验及数值模拟[J].地下空间与工程学报,17(5):1507-1516.
null 夏元友,叶红,刘笑合,等,2010.风化岩体中压力型锚索锚固段的剪应力分析[J].岩土力学,31(12):3861-3866.
null 严敏嘉,夏元友,刘婷婷,2018.地震作用下预应力锚索加固顺层岩坡极限分析[J].岩土力学,39(7):2691-2698.
null 叶红,李艳,2022.软弱岩土体中预应力锚索弯曲锚固段剪应力分析[J].重庆交通大学学报,41(1):91-95.
null 尤春安,2004a.锚固系统应力传递机理理论及应用研究[D].泰安:山东科技大学.
null 尤春安,2004b.压力型锚索锚固段的受力分析[J].岩土工程学报,26(6):828-831.
null 尤春安,战玉宝,2005.预应力锚索锚固段的应力分布规律及分析[J].岩石力学与工程学报,24(6):925-928.
null 尤春安,战玉宝,刘秋媛,2013.预应力锚索锚固段的剪滞—脱黏模型[J].岩石力学与工程学报,32(4):800-806.
null 张君宝,李昌存,李韫芃,等,2022.负泊松比锚索超大断面隧道围岩大变形控制体系[J].科学技术与工程,22(17):7155-7164.
Outlines

/